eSUN Filament 3D ePLA-Matte Almond-Yellow 1.75mm 1kg
ePLA-Matte is a cost-effective matte pla filament that is environmentally friendly and easy to print. Compared with ABS, matte pla has higher rigidity and PC-like strength and does not require a closed cavity.PLA matte filament has low shrinkage, no warping and no cracking quality, and suitable for large-size model printing; The support is easy to peel from the surface.
Filament Properties Table 3D PRINTING FILAMENT ePLA-Matte Density(g/cm3) 1.174 Heat Distortion Temp(℃,0.45MPa) 51 Melt Flow Index(g/10min) 2.1（190℃/2.16kg） Tensile Strength(MPa) 34.56 Elongation at Break(%) 56.1 Flexural Strength(MPa) 41.21 Flexural Modulus(MPa) 1119.41 IZOD Impact Strength(kJ/㎡) 33.15 Durability 4/10 Printability 9/10 Recommended printing parameters Extruder Temperature(℃) 190 – 230℃
Recommended temperature 215℃
Bed temperature(℃) 45 – 60°C Fan Speed 100% Printing Speed 40 – 100mm/s Heated Bed Optional Recommended Build Surfaces Masking paper, PVP solid glue, PEI
Matte pla filament has no smell when printing, which is safe and environmentally friendly; And the reel is made by reusing injection molding of PETG, ABS, PLA production waste and other industrial waste, and the outer box is made of recyclable paper. Make 3D printing more sustainable with the environmental protection concept; The matte pla surface is delicate and does not show layer lines; the filament is not easy to break which made the printing is smooth for a long time without clogging. PLA matte filament can be used for early concept models and rapid prototyping. Low density, ePLA-Matte single-roll consumables are 21% more than other matte PLA product print models.
Easy to peel off the support
Hard to break
Matte surface effect
- * Application
Decorative parts COSPLAY
- * Print model
Il n’y a pas encore d’avis.