Esun Flex 500ml
Disponible sur commande
Esun Flex (0.5KG)
High flex, doesn’t break after multiple fold. Tougher with better tear resistance.
- High Precision
- High hardness
- Shore A: 85-90
- Density: 1.13 – 1.15 g/m3
- Viscosity: 1200 mPa at 25C
- Wavelength: 405nm
- Shrinkage: 6,9%
- Tensile strength: 6-8 MPa
- Elongation at break: 100-150%
- Tearing Strength: 390-320 kN-m
- Flexural strenght: 77 MPa
- Flexural modulus: 2350 MPa
- IZOD Impact strenght: 44 J/m
- Color: Orange
- Bottle: 500Gr
- Color: Yellow transparant
How to use
- Suggest printing temperature is 25-35℃.
- When printing in low temperature it need heating ( 40-60℃) before using
- Lift height > 8mm.
- Lift speed ~ 60 mm/min.
- The waiting time between two exposure > 10s
- Put printed model in water for post curing. Use direct sunlight for 30 min, or UV LED light for 15mins .
Notes & Warnings
- Always wear personal protection (gloves, glasses) when handling resin
- Use your resin 3D printer under well ventilated circumstances
- Suggested safety equipment: gloves, mask, glasses, and lab coat
- Do not expose UV resin to sunlight or indoor light containing UV
- In case you consume UV resin, get medical advise
- In case resin get’s in your eye, wash your eyes with water and get medical advise
- Resin can cause skin irritation, always wear gloves when handling
- Please keep UV resin away from kids
- Keep resin at room temperature(15 – 35 OC) and dry condition.