TB6600 Stepper Motor Driver

Description

What is a stepper motor?
Stepper Motor is a brushless DC electric motor that divides a full rotation into a number of equal steps The motor’s position can then be commanded to move and hold at one of these steps.

How to control a stepper motor?
The fast way to control a stepper motor is just using a stepper motor driver (controller). And TB6600 is just what you need.

TB6600 is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 stepper motor driver has a wide range power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors.

We sell plug-packs of various sizes, the largest of this 24V 5A  Mean -well number . As this is a “chopper” stepper driver, you should get a supply with a higher voltage rating than your motor coils, and a similar or larger current rating. This allows the driver to saturate the coils with flux due to the higher voltage supply, then back off to maintain the current limit of the motor.

The stepper driver supports speed and direction control. You can set its micro step and output current with 6 DIP switch. There are 7 kinds of micro steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability.

As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.

Note: this is a newest upgrade version of TB6600 stepper motor driver.