Coming Soon

Tin Cure Silicone Rubber (R15 / R25)

659.00 DH

SKU: 3DWGHSKAXGYWT Categories: ,

Description

Tin Cure Silicone Rubber: Economical Two-Part Mould-Making Silicone

Tin cure silicone rubber 5 kg bucket with Tin Cure Hardener bottle

A white, two-part, tin-cure (condensation-cure) silicone for making flexible moulds at a low cost per kilo. Mix the base with the supplied Tin Cure Hardener at 100:2 to 100:5 by weight, let it cure at room temperature and get strong, reusable moulds for plaster, gypsum, concrete and wax.

Choose your grade

R15 · Shore A 15
Softer
Very flexible. Easier to demould parts with undercuts and fine detail.
R25 · Shore A 25
Firmer
Holds its shape better for larger moulds and repeated production runs.

What can you make with it?

Ornate white plaster relief with floral detail
Plaster and gypsum ornaments. Rosettes, wall reliefs, medallions and decorative panels with crisp detail.
Decorative cornice moulding with ornate scrollwork
Cornices and mouldings. Reproduce ceiling cornices and architectural trim in long, repeatable sections.
Repeating rosette relief pattern in cast stone or plaster
Cast stone and relief tiles. Patterned wall tiles and decorative stone panels from one master.
Two grey concrete blocks on a trowel with mortar
Concrete and cement. Garden ornaments, planters, pavers and textured concrete panels.

Photos: Eric Prouzet, Ksenia Obukhova, Adam Cai and Nel Ranoko on Unsplash. Examples of the uses shown, not products made with this item.

Key features

  • Low cost per kilo: ideal for large moulds and bigger volumes
  • 100:2 to 100:5 mix ratio by weight with the supplied hardener, so you can adjust the cure speed
  • Room-temperature cure, typically about 24 hours at 25°C, with no special equipment
  • Not sensitive to cure inhibition from sulphur or latex, unlike platinum silicone
  • Two hardnesses: Shore A 15 (R15) and Shore A 25 (R25)

How to use

  1. Prepare a clean, dry master and build a mould box around it. Apply a release agent if the master is porous.
  2. Weigh the base and add the Tin Cure Hardener at 100:2 up to 100:5 by weight. More hardener cures faster. Weigh it accurately, because the ratio controls the cure.
  3. Mix thoroughly for 2 to 3 minutes, scraping the sides and bottom of the container, then pour in a thin stream to limit air bubbles.
  4. Cure at room temperature until fully set, typically about 24 hours at 25°C, then demould and cast.

Tin cure or platinum cure?

Tin cure is the economical choice for plaster, gypsum, concrete and wax casting. Choose our platinum cure silicone when you need a translucent mould, very low shrinkage, a longer mould life, an easy 1:1 mix or moulds for food use.

Frequently asked questions

Which grade should I pick?
R15 for intricate parts with undercuts, R25 for larger or flatter moulds that need to stay firm.

What is the mix ratio?
100 parts base to 2 to 5 parts hardener by weight. Always follow the technical information supplied with your batch.

Can I make food moulds with it?
We recommend our platinum cure silicone for moulds used with food.

What is in the kit?
A 5 kg bucket of base with a Tin Cure Hardener bottle, in R15 and R25.

Additional information

Grade

R15, R25

Frequently asked questions

What are the delivery times and methods?

Shipping in 24h or store pick-up (3 Lotissement Promo Sud, Ain Atig, 12040 Témara). We deliver all over Morocco. See our delivery methods.

How can I pay?

By bank transfer or cash on delivery.

Can I return a product?

Yes, returns are free within 14 days. Warranty & returns.

Need advice or a quote?

Our team is available Monday to Friday, 9am to 5pm, on +212 808 553 495. You can also request a quote or write to us.

How do I track my order?

Use the order tracking page.