ELEGOO Standard 1.0 Photopolymer Resin Skin 405nm 1 Kg

Description

ELEGOO Standard Resin 1.0 — Beige (Skin), 405nm, 1 kg

The beige/skin shade of this ELEGOO standard resin is designed for figurines, busts and parts to be painted: the colour imitates a natural skin tone straight out of the vat, which helps judge the look of a bust before painting, or display it as is. The low volumetric shrinkage during curing keeps fine details (facial features, clothing folds) faithful to the file, with a smooth surface that limits sanding.

Print settings

Bottom exposure: 60 s · Normal exposure: 8 s
Starting values — to be refined according to the printer and layer thickness.

Technical specifications

• Hardness: 84 D — Shrinkage: 7.1%
• Viscosity (25 °C): 150–200 mPa.s
• Liquid / solid density: 1.100 / 1.195 g/cm³
• Flexural strength: 59–70 MPa — Tensile strength: 36–53 MPa
• Elongation at break: 14.2%
• Storage: 1 year, away from light

Compatibility

LCD/DLP 3D printers — gives its best results on LCD printers (Mars, Saturn, Jupiter series).

Precautions

• Bien agiter avant chaque utilisation
• Print between 20 °C and 25 °C
• Gloves and mask required — avoid any contact with the skin
• Keep out of reach of children, away from dust and direct sunlight
• In case of contact with the skin, rinse immediately and thoroughly with water

Fast profile (0.1 mm layers)

For drafts, large parts and jigs, double the layer height. You print half the layers, often around 40% faster, with more visible layer lines.

Setting	Starting value
Layer height	0.1 mm
Layer exposure	About 1.5 × your 0.05 mm layer exposure
Bottom layers and bottom exposure	Same as your 0.05 mm settings
Lift and retract	Same as your 0.05 mm settings

Calculated starting values, not manufacturer test data. Print an exposure test (RERF or validation matrix) first and adjust for your printer.