ELEGOO Mercury Curing
- 【Intelligent Time Control】The LED time display enable you to control the curing time conveniently.
- 【Light Driven Turntable】The light driven turntable is able to absorb UV light to rotate without battery.
- 【Reflective Sheet】There is reflective sheet inside the cabinet which have the lights focused to get a better curing effect.
- 【Two 405nm LED Strip】ELEGOO curing box adopts two 405nm LED strip (14 UV LED light in total) in order to fast cure and evenly illuminate printed models.
- 【See-through Window】The see-through window not only assists you to observe the curing process, but also help keep the UV light away from leakage.
- Product Name： ELEGOO MERCURY Curing Machine
- Control Method: Touch-sense Key Controller
- LED Lamp: 405nm
- Rated Power: 25W;
- Input Voltage: 110V/220V 50/60Hz
- Time Setting: 0-9mins30s
- Machine Size：φ150*251. 5mm
- Maximum Curing Size：φ142*150mm
- Machine Net Weight： 1.35kg
ELEGOO Mercury UV Curing Machine outputs steady, focused and consistent UV lights to cure the models printed with photopolymer resins 360°. The post curing process increases the hardness and durability of the printed products.
- Please do not take away the box cover while the machine is working.
- To avoid overheating of the curing cabinet, please do not use it for more than 40 minutes at a time.
- After the model is printed, please clean and blow-dry the model before putting it into the curing machine.
- The recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%.
- If the model become yellow after curing, please adjust the curing time. Over curing will lead to a yellowing model.