eResin PLA Black 500ml

Description

This product has the following characteristics:

• Environmental, bio-based
• High strength and toughness, balanced performance
• High precision, high resolution
• Compatible with color screen, monochrome screen, large and small size printers

This product has excellent resolution and is suitable for making props and dental models that require high resolution.

All levels (5 levels of score):

Strength ?S?	3
Toughness ?F?	3.5
Forming?P?	4
Accuracy ?S?	4.5
Speed?A?	3

 

Performance parameters:

3D PRINTING PHOTOPOLYMER RESIN	eResin-PLA Pro
Tensile Strength(MPa?	37-48
Flexural Strength(Mpa)	36-49
Elongation at Break(%)	25-28%
IZOD Impact Strength/(J/m?	32-36
Hardness(Shore D)	78-80
Viscosity	200-300
Density	1.09-1.10

 

Printing parameters:

eResin-PLA Recommended Settings For Printer
	Exposure Time?s?	Bottom Exposure Time?s?	Layer Height?mm?	Bottom Layer Height?mm?	Lift Distence(mm)	Bottom Lift Distence(mm)	Retract Distence(mm)	Bottom Retract Distence(mm)	Lift Speed(mm/min)	Bottom Lift Speed(mm/min)	Retract Speed(mm/min)	Bottom Retract Speed(mm/min)
ELEGOO Saturn	4,2	33	0,05	5	7	7	7	7	70	70	210	210
ELEGOO Mars 2 Pro	4	35	0,05	5	5	5	5	5	80	60	210	210
ANYCUBIC Photon Mono X	1,7	22	0,05	6	8	8	8	8	180	180	240	240
ANYCUBIC Photon Mono 4K	4	40	0,05	6	6	/	6	/	240	/	360	/
ANYCUBIC Photon Mono SE	4	35	0,05	6	6	6	6	6	240	240	240	240
VOXELAB Proxima 8.9	3,7	40	0,05	5	8	8	8	8	60	60	150	150
PHROZEN Sonic Mighty 4K	4,2	40	0,05	6	8	8	8	8	60	60	150	150
CREALITY HALOT ONE	5	40	0,05	10	6	/	6	/	60	/	60	/
CREALITY LD006	3	22	0,05	5	7	7	7	7	70	70	150	150

 

 

Fast profile (0.1 mm layers)

For drafts, large parts and jigs, double the layer height. You print half the layers, often around 40% faster, with more visible layer lines.

Setting	Starting value
Layer height	0.1 mm
Layer exposure	About 1.5 × your 0.05 mm layer exposure
Bottom layers and bottom exposure	Same as your 0.05 mm settings
Lift and retract	Same as your 0.05 mm settings

Calculated starting values, not manufacturer test data. Print an exposure test (RERF or validation matrix) first and adjust for your printer.