UltraCast Resin for Jewelry 1kg
1,798.00 DH
In stock
Description
-
Description
The resin developed for jewelry casting; very little burning ash and residues, good casting performance, can produce high-quality jewelry pieces; high precision, the details of the fine and complex models in the jewelry industry are clearly visible; used for the loss of gold, silver and copper ornaments Wax casting.
- * Application
Castable resin for Jewelry Recommended Settings For Printer:
| Castable resin for Jewelry Recommended Settings For Printer | ||||||||||||
| Exposure Time?s? | Bottom Exposure Time?s? | Layer Height?mm? | Bottom Layer Height?mm? | Lift Distence(mm) | Bottom Lift Distence(mm) | Retract Distence(mm) | Bottom Retract Distence(mm) | Lift Speed(mm/min) | Bottom Lift Speed(mm/min) | Retract Speed(mm/min) | Bottom Retract Speed(mm/min) | |
| ELEGOO Saturn | 5,2 | 50 | 0,05 | 5 | 7 | 7 | 7 | 7 | 70 | 70 | 210 | 210 |
| ELEGOO Mars 2 Pro | 5 | 50 | 0,05 | 5 | 5 | 5 | 5 | 5 | 80 | 60 | 210 | 210 |
| ANYCUBIC Photon Mono X | 2 | 50 | 0,05 | 6 | 8 | 8 | 8 | 8 | 180 | 180 | 240 | 240 |
| ANYCUBIC Photon Mono 4K | 5,5 | 50 | 0,05 | 6 | 6 | / | 6 | / | 240 | / | 360 | / |
| ANYCUBIC Photon Mono SE | 4,5 | 40 | 0,05 | 6 | 6 | 6 | 6 | 6 | 240 | 240 | 240 | 240 |
| VOXELAB Proxima 8.9 | 4,5 | 55 | 0,05 | 5 | 8 | 8 | 8 | 8 | 60 | 60 | 150 | 150 |
| PHROZEN Sonic Mighty 4K | 5,5 | 50 | 0,05 | 6 | 8 | 8 | 8 | 8 | 60 | 60 | 150 | 150 |
| CREALITY HALOT ONE | 6 | 60 | 0,05 | 10 | 6 | / | 6 | / | 60 | / | 60 | / |
| CREALITY LD006 | 3 | 45 | 0,05 | 5 | 7 | 7 | 7 | 7 | 70 | 70 | 150 | 150 |
Fast profile (0.1 mm layers)
Use 0.1 mm layers for size checks and draft patterns only. Layer lines transfer to the metal, so print final patterns at 0.05 mm or finer.
| Setting | Starting value |
|---|---|
| Layer height | 0.1 mm |
| Layer exposure | About 1.5 × your 0.05 mm layer exposure |
| Bottom layers and bottom exposure | Same as your 0.05 mm settings |
| Lift and retract | Same as your 0.05 mm settings |
Calculated starting values, not manufacturer test data. Print an exposure test (RERF or validation matrix) first and adjust for your printer.
Reduce metal weight in jewellery
- Design to the low side of your tolerance: a wall modelled at 1.0 mm instead of 1.2 mm uses about 17% less metal in that area.
- Measure before you thin: print and cast a test ring, then apply the real shrinkage and polishing allowance in your CAD or with your slicer’s size compensation.
- Hollow bulky sections such as heads, pendants and thick shanks, and leave openings so the investment can fill them.
- Keep walls thick enough for the metal to fill. A minimum of 0.6–0.8 mm is common; confirm it with your casting house.
Frequently asked questions
What are the delivery times and methods?
Shipping in 24h or store pick-up (3 Lotissement Promo Sud, Ain Atig, 12040 Témara). We deliver all over Morocco. See our delivery methods.
How can I pay?
By bank transfer or cash on delivery.
Can I return a product?
Yes, returns are free within 14 days. Warranty & returns.
Need advice or a quote?
Our team is available Monday to Friday, 9am to 5pm, on +212 808 553 495. You can also request a quote or write to us.
How do I track my order?
Use the order tracking page.










