Aufero AL2 Laser Engraving & Cutting Machine
2,990 DH – 4,990 DH
Description
A Lot Faster Than the Typical
32-Bit MCU on the 9th Generation Motherboard Stepper motor speeds can be increased from 4000mm/min to 10,000mm/min or even 15,000mm/min thanks to the ESP32 MCU’s motion algorithm and a low center of gravity.
The installation takes only 10 minutes
Whether or not you have already used a laser engraving machine, this is the best high-performance machine for novices.
Secure Design
A laser filter cover blocks 98 percent of the UV radiation. A light filter cover is attached to the laser head to keep animals from grabbing the laser spot. The laser will immediately shut off to prevent any harm if the machine is tilted or shifted, if the computer fails during engraving or if the motors stop moving.
Newest Compressed Focal Spot Laser Beam Innovations
Cutting depth of up to 12mm thick wood, 10mm acrylic, carving ceramics, and stainless steel can all be done with the latest Aufero AL2 5.5W high-compression focal point laser module diode.
LaserGRBL (Free)—Basic and easy-to-use
Compatible with Windows from XP to W10 / Linux.
Supports JPG / PNG / BMP / DXF / NC, etc.
LightBurn (Paid)—Advanced and highly customizable
Compatible with Windows from XP to W10 / Linux / Mac OS.
Supports JPG / PNG / BMP / DXF / NC, etc.
【10W】Wood & Acrylic Cutting(One PASS-Without Pumb)
Technical Specifications
Informations complémentaires
| Laser Power | 10W, 2W |
|---|
Produits similaires
-
Uniquement pour les clients enregistrésDisponible sur commande
Avis
Il n’y a pas encore d’avis.