BlueCast X-Nova / Unique+ Castable Resin for Jewelry 500ml
1,149.00 DH
In stock
Description
New generation castable resin for Monochromatic LCD and DLP 3D Printers!
Unique + ® is the real meltable resin developed and produce by BlueCast® for DLP and Monochromatic LCD machines. Thanks to the low temperature melting polymer it ensures smooth surface finish and perfect lettering.Uni
It was developed by BLueCast R&D in order to allow perfect casting results with any kind of investments and burnout cycles.
-
Description
BLUECAST Unique+ for mono LCD/DLP
Revolutionizing new High Wax Resin, Melts at low temperatures can be cast at any casting house, Just use the same wax burnout schedule they have been using. The Advantages of this resin are Endless, one Formulation for Mono and DLP Machines, this is not recommended to be used on Poly LCD (long print times) and Formlab printers.
The main Unique futures are:
– Perfect casting results with any kind of investments and burnout cycles. Low
temperature burnout compatibility.
– Low-temperature melting polymer ensures a smooth surface finish and perfect lettering.
– Extreme accuracy and exceptional detail without shrinkage.
– No bleeding issue also on LCD machines.
– The first real meltable resin at low temperature.
– Excellent dimensional stability in time. No shrinkage (natural shrinkage will be compensated during printmaking polymer expand chemically).
– Low viscosity (easier to clean, easier to get back from patterns).
– Strong adhesion to the platform, no need to primer.
– Toxic and carcinogenic component free.
– Low fumes emission during burnout
– The first castable resin was developed for the new Generation MONO LCD and DLP printers.
– Finally, you can cast in any casting house/service every kind of pattern with text, engravings, micropavè, etc.Size: 500g
Fast profile (0.1 mm layers)
Use 0.1 mm layers for size checks and draft patterns only. Layer lines transfer to the metal, so print final patterns at 0.05 mm or finer.
| Setting | Starting value |
|---|---|
| Layer height | 0.1 mm |
| Layer exposure | About 1.5 × your 0.05 mm layer exposure |
| Bottom layers and bottom exposure | Same as your 0.05 mm settings |
| Lift and retract | Same as your 0.05 mm settings |
Calculated starting values, not manufacturer test data. Print an exposure test (RERF or validation matrix) first and adjust for your printer.
Reduce metal weight in jewellery
- Design to the low side of your tolerance: a wall modelled at 1.0 mm instead of 1.2 mm uses about 17% less metal in that area.
- Measure before you thin: print and cast a test ring, then apply the real shrinkage and polishing allowance in your CAD or with your slicer’s size compensation.
- Hollow bulky sections such as heads, pendants and thick shanks, and leave openings so the investment can fill them.
- Keep walls thick enough for the metal to fill. A minimum of 0.6–0.8 mm is common; confirm it with your casting house.
Frequently asked questions
What are the delivery times and methods?
Shipping in 24h or store pick-up (3 Lotissement Promo Sud, Ain Atig, 12040 Témara). We deliver all over Morocco. See our delivery methods.
How can I pay?
By bank transfer or cash on delivery.
Can I return a product?
Yes, returns are free within 14 days. Warranty & returns.
Need advice or a quote?
Our team is available Monday to Friday, 9am to 5pm, on +212 808 553 495. You can also request a quote or write to us.
How do I track my order?
Use the order tracking page.









